Features:
1. Detect and display water depth, approximate fish location, short & tall weeds, sand, and rocks on seabed. Apply to lake, river, sea and other fishing environment. Depth range from 0.7m to 100m. NOTE: The depth is measured from the sonar sensor, not the float.
2. Round transducer with 25 ft cable and removable transducer float. Can be used for fishing off the dock, on a boat, and ice fishing.
3. Various features settings: 5 user selectable sensitivity; battery save mode; backlight mode; fish alarm; unit of measure. Water depth shows by meters/feet
4. Detect and display grass, short & tall weeds, sand, and rocks on seabed
5. Get the approximate location of fish and the depth of water
6. Round transducer sensor with 7.5 m cable, 45-degree beam angle
7. With fish depth scale and audible fish alarm, User selectable meter or feet readings
Attention:
1. It will turn off automatically if the depth display reads “—” continuously for 5 minutes.
2. The transmitter is waterproof, but the receiver (unit with screen) is not waterproof, so please do not submerge or spray the fish finder screen with water.
3. It can not be used to detect bait fish(motionless) or fish that is smaller than 10cm.
4. When use this fish finder on moving boat, please make sure the moving speed is slowly (lower than 5 mph).
5. The product can only show you where the fish are. It can not show you how big the fish are, but you could adjust the Sensitivity setting. When the Sensitivity is high, it will show you both big fish and small fish; when low, it will only show you the big fish.
6. Extremely cold weather will impact the performance of the product. It is suggested that you keep the unit in temperatures above 0 degrees during operation.
7. Strong waves, suspended matter and muddy water,will affect the performance.
Ice fishing:
1. Please remove the snow on ice to make sure the ice surface is smooth.
2.If there are any air between the sonar sensor and ice, or the water below the ice, the unit will not work properly and will require you to try another spot, or cut a hole in the ice to use.
3. The hole on the ice would be better to be bigger.
How to use the Sonar Sensor:
1. Toss the sensor and float into the water(Place the sensor and float in your hand, and toss underhand);
2. Attach the Side-Scan Adapter to the boat hull using the mounting tabs;
3. Attach the sensor to a handle, lower the sensor into the water.
Descriptions:
This amazing product is especially designed for amateur and professional fishmen alike, to findout the location of fish and the depth of water. The unit can be used in ocean, river or lake and is fantastic for datecting schools of fish in any particular area. Using amazing and innovative technology, this portable fish finder is the ideal tool to bring the fish to you! Sonar technology is based on sound waves. The system uses sonar to locate and define struture, bottom contour and composition, as well depth directly below the transducer. The transducer sends a sound wave signal and determines distance by measuring the time between the transmission of the sound wave and when the sound wave is reflected off an object; it then uses the refelcted signal to interpret location, size and composition of an object.
The range of depth read out from 0.7 meters up to 100 meters, display bottom rock or grass with removable float. Go to fish with this amazing transducer fishfinder.
Specifications:
Brand: Lucky
Material: ABS
Color: Black&Orange
Dimensions: 120 x 67 x 30mm
Main Function: Fish Finder with Sonar Sensor + 9 meter cable
Display: 2” Anti-UV LCD
Backlight: Green LED
Sensor Beam Angle: 45 Degrees (200kHz)
Depth range: 0.7m to 100m (2ft to 328ft)
Sonar Cable Length: 9 Meters (29.5 Feet)
Operating Temperature: -20 C to 70 C (-4 F to 158 F)
Power by: 4 x AAA batteries (not included)
Package Includes:
1 x Portable Fish Finder With LCD Screen(4Pcs AAA batteries not included)
1 x Round Sonar Sensor with 9m (29.5 feet) Cable
1 x Bolt
1 x Wing Nut
1 x Neck Strap
1 x User Manual
