NEW NT68676 HDMI+DVI+VGA LCD Controller Board Diy Monitor Kit for 10.1″ PQ3QI-01 LED Panel 1024×600
This is a great set of easy-reassembling LCD controller kit which is used to turn a bare LCD panel into a desktop/PC monitor. It will be a surprise that your bare LCD will be of good use, and no longer be a waste. Or it is a very insteresting things that we make a monitor successfully by ourselves.
Plug&play kit, no need soldering.
Attention: Please make sure that your lcd model number is PQ3QI-01, else please remember to contact us for suggestion.
Beside this kit, you will need to prepare the VGA cable/DVI cable/HDMI cable and power adapter (Ouput 12V,4A — it is for small size lcd from 10.1inch to 22inch) yourself

Important Notes:
1. Please make sure that your LCD is ok before bidding this item, else you will be responsible for the incompatibility.
2. If you concern much about resolution setting, please reconsider before bidding!
3. If you are not specialized in electronics or have doubts in operation, please contact us for instruction, as we are not able to responsible for wrong operation.
4. After finishing the connecting, please don’t rush to power on! First, use multi-meter to test whether the GND of the LCD is connected with the GND of the controller board. If not, please check the connection again. If yes, please test whether there is a short circuit between the red wires and black wires of the LVDS cable. If there is a short circuit, it means opposite connection or other errors. Any problem, please feel free to contact us. DIY needs a certain professional knowledge, please kindly take the responsibility of the risk. No metal contact is allowed when powering on the controller board, otherwise short circuit may occur, which may cause unavailability of the controller board.
If you need driver board for other screens,please email us.
we can support too.



