EU Plug RF Wireless Control EU Socket Wall Plug Power Outlet RF433 Remote Control Turn On/Off Home Appliances Smart Home 110-240V/AC
-Simple and easy to use, just plug in and use. Remote control on/off any appliance. low standby power consumption and built-in child protection feature.
– Strong RF Signal: RF signal working through doors and walls without interfering with other electronics, thereby allows you to command hard-to-reach appliances and devices without built-in power ON/OFF switches at the push of a button.
-This device is a great solution for controlling appliances in inaccessible areas, or for people with limited mobility.
-Saves you the trouble of having to plug in and unplug your electric appliances to conserve energy consumption; a great assistant to the mobility impaired.
-It can be used for a wide variety of appliances such as lights, fans, TV’s, coffee machines, AC-heaters and refrigerators etc.
-It is great if you need to get out of bed in the middle of the night,you can remote control to turn on the lighs.you also can remote control to turn other rooms’ lights on and off.
-Strong RF signal works through doors and walls without interfering with other electronics.
-Each remote control can match 4 channel sockets
-Power supply: 110-240V/AC 50Hz
-Radio frequency: 433.92MHz
-Power consumption: <0.5 W
-Power input: Max. 3000W
-Code setting:Self-tach in
-ON/OFF display: LED
-Remote range:20m
-Battery type:3V DC CR2032
Operating Guide
For first use
Plug the socket into a main or wall socket,under off situation, press manual button on the socket last for 3 seconds ,the LED will flash once per second (under learning code situation).Point the remote at the socket and hold down one of buttons of ON or OFF on the remote(1,2,3 or4) until the LED flashes continuously in 2 seconds.And then the LED is off,that means the code was successfully learned by socket,and the socket has memorized the code.Then press ON or OFF button which is chose,the socket works.
For advanced use
Under off situation,press manual button on the socket last for 3 seconds or hold down the OFF button on the remote of which channel has learned code continuously for 3 seconds.Then the LED flashes once per seconds,that means the socket turns into learning situation.In this moment,it can learn another remote code.
Please Note:
this is RF433WHz Remote controlled socket, can not support WIFI,If you need WIFI function, please working with Broadlink RM PRO Wifi Controller
