4 in 3 out Stereo Switcher Box AUX Speaker / Amplifier Selector
l MC403 multifunctional switch box supports 4 in 3 out, which allows maximum 3 AUX in and 1 Bluetooth in, as well as 3 out to various devices. For example, while connecting WII, iPod, DVD with the input of MC403 and connecting tube amplifier, digital amplifier, recorder with the output of MC403, it will be easier to switch among different players and amplifiers.
l MC403 can also be used as a Bluetooth stereo audio receiver. It supports Bluetooth 4.0 with external Bluetooth antenna, which can ensure Hi-Fi audio transmission and strong signal receiving. Please note it needs to be connected with 5V power supply (computer USB or phone chargers would be OK) to active its Bluetooth function. When connected with power supply, the indicator on the front panel will light to show its working condition.
l The two 3.5mm interfaces on the front panel are input and output separately. With this design, it is easier to connect iPod / computer with this 3.5mm input instead of the RCA on the back. Meanwhile, the 3.5mm output is designed for headphones that you may need to avoid disturbing others. Please note the input source should have enough power to drive headphones.
l MC403 is designed with “one key to mute” function, which provide much convenience for special conditions.
Features:
l High quality rotary switch
l Easy to use and install
l Hot-swappable (no need to reboot computer)
l 2 manual switch buttons (selector/mute)
l For small office or home office
l 2 * RCAinput, 2 * RCA output, 1 * 3.5mm input,1 * 3.5mm output
l 4 audio devices =>3 selectable outputs (manual selection switching)
l Mini size: 150*105*68 mm, easy to install on your desk
l Weight:350g
l Notice: cable is not included
l Bluetooth receiver is Plug/Play kit,if your item bluetooth function broken. Just ask us to get replacement,you can easy replace it, (do not solder)
How to use Bluetooth:
1. Turn your cellphone bluetooth function ON
2. Search bluetooth device, find out the name”WIN-668”, and pair it,DO NOT NEED ENTER ANY CODE
3. Now you can play your cellphone music through bluetooth
4. Tips: Bluetooth receiver output power:20mW, so, it’s can be direct work with 12~120 ohm headphone, just make sure turn your cellphone volume to higher
How to install the bluetooth antenna
1. Hold the antenna BLACK part and do not move it.as the picture.
2. Then tighten the antenna screw to the antenna socket, until the antenna fixed on the socket
3. Notice:do not try to Rotate antenna to tighten the screw!
Package included:
1 x selector box
1 x USB to 5.5/2.1 DC jack cable
1 x USB power supply (work for 110~240V)
1 x Bluetooth Antenna
1 x Manual











