REDOT 2017A Mini Digital Power SWR Meter 199W AM/FM/SSB/CW 1.6 – 60MHz for 2-way radio mobile radio Digital swr meter
Features:
u Battery installation: Remove 4 black round screws on the corner of back cover and open it. Install 3 AAA batteries. BE CAUTIOUS to the polarities. Put the cover on and fasten the screws. IMPROPER INSTALLATION OF BACK COVER WILL CAUSE ERROR ON U-BAND MEASUREMENT!
u Connect the Output of your transceiver to “TX” and Antenna or Load to “ANT”. NOTE: UHF connectors (normally named “M”, SL16, SO239 ect.) for HF-Band. Proper adaptor/cable is required if your device has different type of connectors.
u Press the red button to power on. After 2 seconds of LCD self test, it’s ready for normal measurement.
HF-Band meter will display in sequence:”+ XXX P” (passthrough power),”: XXX P” (passthrough power),” XXX ” (SWR value), 2 seconds display for each mode. Press the red button will hold the current display. Press it again to continue the display.
u Under the environment of night or weak illumination, just press and hold the red button for 1 second to turn the blue back light on. Press and hold the red button for 1 second again to turn it off.
u 8 minutes after no power was measured, it will power off automatically. Press and hold the red button for 2 seconds to turn off manually.
u This is the quick reference. More detailed information for Digital SWR/Power Meter are available at the following wed sites and forums.
Specification:
|
MAX.POWER: |
199W |
|
VSWR: |
1.00 ~ 19.9 |
|
Frequency Range: |
1.6MHz – 60MHz |
|
Display: |
3 1/2 LCD |
|
Conversion Resolution: |
100/S,12BIT |
|
Insertion loss: |
< 0.2 dB |
|
Direction: |
> 30 dB |
|
Battery: |
AAA*3 |
|
Size: |
67 * 69 * 37 (mm) |
|
Interface: |
UHF-KF(SO239) |
|
Net Weight: |
300g |
Package:
|
1x Digital Power & SWR Meter 1 x User Manual
|





















